P-90 im Humbuckerformat

Alles über Stromruder
Benutzeravatar
Magman
Beiträge: 17688
Registriert: Montag 13. Oktober 2014, 18:17
Kontaktdaten:

Re: P-90 im Humbuckerformat

Beitrag von Magman » Samstag 4. Juli 2015, 13:33

Soeben reingekommen und passt gerade voll in diesen Thread. David Barfuss ist der erste der Soapbars in Humbuckergröße fertigt. Ist ein Thermoform Cover. Sehr geil!

Bild
Bild
STOMPIN' HEAT …we are ready to rock :mosh:

Benutzeravatar
Caisa
Beiträge: 83
Registriert: Sonntag 26. Oktober 2014, 09:32

Re: P-90 im Humbuckerformat

Beitrag von Caisa » Sonntag 5. Juli 2015, 14:30

Moin Martin,

interessanter Pickup vom D.B. aber die Spulengeometrie eines echten P90 wird auch der nicht erreichen oder??

Gruß,
Stephan
"Wir Lebewesen sind das Komplizierteste, was es im bekannten Universum gibt.“

R. Dawkin

partscaster
Beiträge: 3300
Registriert: Dienstag 21. Oktober 2014, 19:58

Re: P-90 im Humbuckerformat

Beitrag von partscaster » Sonntag 5. Juli 2015, 14:45

Caisa hat geschrieben:Moin Martin,

interessanter Pickup vom D.B. aber die Spulengeometrie eines echten P90 wird auch der nicht erreichen oder??

Gruß,
Stephan
Aber cooler aussehen tun sie so wenigstens! :mrgreen:

Grüße
Michael

Fantomas

Re: P-90 im Humbuckerformat

Beitrag von Fantomas » Sonntag 5. Juli 2015, 14:46

Caisa hat geschrieben:Moin Martin,

interessanter Pickup vom D.B. aber die Spulengeometrie eines echten P90 wird auch der nicht erreichen oder??

Gruß,
Stephan
warum sollte es nicht? Die Geometrie kann ja bleiben wie sie ist. es kommt aber eine größere kappe drüber..und fertig ist die Laube!

Benutzeravatar
tommy
Beiträge: 10986
Registriert: Dienstag 21. Oktober 2014, 20:51
Wohnort: Norderstedt SH

Re: P-90 im Humbuckerformat

Beitrag von tommy » Sonntag 5. Juli 2015, 17:01

...sind original P90 nicht länger als HBs?
LG, Tommy


Esst mehr Obst!

Fantomas

Re: P-90 im Humbuckerformat

Beitrag von Fantomas » Sonntag 5. Juli 2015, 17:17

tommy hat geschrieben:...sind original P90 nicht länger als HBs?
Nö!

Benutzeravatar
tommy
Beiträge: 10986
Registriert: Dienstag 21. Oktober 2014, 20:51
Wohnort: Norderstedt SH

Re: P-90 im Humbuckerformat

Beitrag von tommy » Sonntag 5. Juli 2015, 17:40

...ach guck!

:idea:
LG, Tommy


Esst mehr Obst!

colombo

Re: P-90 im Humbuckerformat

Beitrag von colombo » Sonntag 5. Juli 2015, 20:03

tommy hat geschrieben:...sind original P90 nicht länger als HBs?
Ja, das sind sie, HB = 69,7 mm ( Größe der Spulenkörper) ; P90 = 85,2 mm

Quelle: http://www.tonerider.com/files/schemati ... metric.jpg; http://www.tonerider.com/files/schemati ... metric.jpg

Fantomas

Re: P-90 im Humbuckerformat

Beitrag von Fantomas » Sonntag 5. Juli 2015, 20:35

Nö! Spulenkörper HB =56,67 Spulenkörper P90 = 55,07. Macht also 1.5 mm Unterschied. Es kommt nicht auf die Außenmaße an, wie Columbo annimt, sondern auf den Wickelkörper selbst. DIE ist für die Spulengeometrie und letzlich den Klang von Relevanz.

Benutzeravatar
BB Kassel
Beiträge: 395
Registriert: Mittwoch 29. Oktober 2014, 12:22

Re: P-90 im Humbuckerformat

Beitrag von BB Kassel » Montag 6. Juli 2015, 09:32

Es gibt tatsächlich wohl viele Mißverständnisse, als auch viel Unbekanntes zum Thema P90 pickups. Wen es interessiert, hier ein wenig Info zum P90 aus dem Netz:

Bild

Gibson Alnico V “Staple”

Enter your vast, climate-controlled guitar closet and open the case housing your mint-condition 1954 Les Paul Custom in tuxedo-matching black. In the neck position you’ll see a Gibson Alnico V pickup, complimenting a P-90 pickup at the bridge. Developed by the late Seth Lover around 1952 or ’53, the Alnico V was a louder version of Gibson’s earlier single-coil, the P-90. While the era’s gold, maple-topped Les Pauls sported a pair of P-90s, the mellower, all-mahogany Custom benefitted from the brighter-sounding (and cool-looking) Alnico V.

(The pickup gets its name, of course, from the alloy of aluminum, nickel, and cobalt melded with iron to form the magnets in many guitar pickups. There are many alnico variations, each denoted by a number, though alnico 2 and 5 are most common in guitar pickups.)

Scotty Moore’s 1954 Gibson L5 CESN, purchased for $565 in 1955, came with Alnico V pickups in both the neck and bridge positions.

Gibson also installed Alnico Vs in their L-5 and Super 400 models, using a dog-eared version appropriate for archtop mounting. Gibson officially designates it the “480” pickup—the “staple” moniker comes from the appearance of its square magnets, chosen by Lover in a deliberate attempt to visually differentiate the pickup from DeArmond’s Model 200 pickup (later known as the Dynasonic). Cosmetics aside, the two pickups are very similar.

Seymour Duncan describes the Alnico V as having more output and clarity and a “tighter” tone relative to the P-90. Duncan also notes that it’s well suited for the relatively dark tone mahogany produces. The two models are quite different in construction: While a P-90 has bar magnets at its base and adjustable screws for pole pieces, the Alnico V’s square pole pieces are the magnets. Fine, old-school 1950s mechanical engineering resides within: In addition to offering a unique look, the square magnets allow space for six pole piece-adjustment screws. Like a DeArmond 200, the adjoining screws connect to an underlying spring mechanism, enabling individual pole piece height adjustment. The intricate yet effective design is evident when viewing the pickup from the bottom.

Compared to a Fender single-coil pickup, the Alnico V incorporates a flatter but wider bobbin with more windings, giving it higher DC resistance. Meanwhile, stronger magnets provide more output. A Strat pickup might have DC resistance of 6.3k with 40 to 50 gauss, while an Alnico V is around 8.6k with more than 50 gauss.

The Alnico V/Les Paul relationship was relatively short-lived—by 1957 Les Pauls featured Lover’s new humbuckers. But the Alnico V wasn’t quite extinct—it reappeared in the 1970s and again in the 2000s in reissues of the 1955 Les Paul Black Beauty. But these days, the Alnico V is chiefly a custom shop specialty.

A close relative to the Alnico V, according to Gibson master luthier Jim DeCola, is a P-90 that appeared in 1946 on the ES-125. That version used round magnets (probably alnico 2) for the pole pieces, not the steel adjusting screws typical of P-90s. (The 1946 P-90 wasn’t exactly the same—the larger rectangular cross-section of the Alnico V puts the magnets’ edges closer to the coil.) That 1946 cousin, now called the P-90S, is found on the new budget-conscious Les Paul Melody Maker.

Seymour Duncan makes a faithful Alnico V reproduction, though Duncan concurs that the pickup was originally conceived as a DeArmond clone—a fact confided by his longtime friend, Alnico V creator Seth Lover. That, says Curtis Novak, is why he doesn’t make an Alnico V reproduction. “People ask me why,” he says. “It’s because it’s essentially a Dynasonic.”
.....

Antworten